High Performance Polycarbonate Roofing Sheet with a Prismatic Surface

A high-performance impact resistant polycarbonate roofing sheet engineered for professional and residential projects.

SUNTUF Beehive generates diffused light with reduced glare for enhanced comfort.
Hail proof polycarbonate that combines superior strength and durability.

An excellent choice for DIY skylights, carport roofing, and other home improvement projects.
Add modern aesthetics and style to your roofing project while extending its lifespan!


SUNTUF Beehive is a high-performance DIY roofing sheet ideal for residential and commercial roofing projects.

Lightweight & easy
to install

Hail & impact

Improved absorption
of rain noise

Superior strength
& durability

Balance shade
& daylight

Protects against
UV radiation


SUNTUF Beehive is an ideal roofing solution for home & outdoor
  • Swimming pool roof

  • Durable patio roofing

  • Clear pergola cover

  • DIY polycarbonate pergola roofing

  • DIY patio roofing

  • Outdoor rain cover

  • Gazebo roof

  • Outdoor rain canopy

  • DIY skylight roofing

Color Swatch

Choose from the SUNTUF Beehive range translucent and transparent colors
  • Solar Ice

    25% light transmission

  • Solar Control

    20% light transmission

  • Bronze

    33% light transmission

  • Clear

    87% light transmission

  • Grey

    60% light transmission

  • Solar Olympic

    25% light transmission

  • Gold

    20% light transmission


SUNTUF Beehive polycarbonate high impact roofing sheet
  • SUNTUF Beehive: how to DIY

    Hail resistant, UV protected, and cool daylight for all-day comfort.  Upgrade your garden canopy today!

    Watch video>
  • How to store SUNTUF Beehive

    SUNTUF Beehive sheets last for years. Here are some tips for storing them before installation.

    Watch video>
  • SUNTUF Beehive roof pitch

    Make sure your SUNTUF Beehive roof slope allows proper drainage

    Watch video>


Show FAQs
How do I curve the polycarbonate to follow the façade curve?
All Palram polycarbonate products can be cold bent onsite during installation, subject to a minimum radius. The radius varies based on the chosen product. For flat sheets such as PALSUN & SUNLITE, the rule-of-thumb for the minimum radius is the thickness multiplied by 200. Please check the Palram catalog for more detailed specifications.
How do I specify the required thickness of the polycarbonate glazing material?
The recommended thickness of the polycarbonate glazing material is based on factors such as wind & snow load, panel size, and boundary conditions. Visit the Palram website for access to calculators that can help you determine the recommended thickness.
How do I reduce the heat build-up coming from the façade into the building?
In order to reduce heat build-up through the façade, Palram strongly recommends the use of its tinted SolarSmart™ panels. SolarSmart™ tints can be implemented in all Palram polycarbonate products. For more information, reference the Palram SolarSmart™ technology page.
What is the minimum allowed bending radius of polycarbonate?
The minimum allowed bending radius of the polycarbonate is 200 times the thickness of the sheet, for example, a 2 mm sheet has a minimum 400 mm bending radius.
Can the percentage of light transmission be controlled? I need a lot of light but I need it to be diffused.
Palram offers various LT% parameters – from 0% to 90%. In addition, we offer a color called a “diffuser” that allows 85% of the light in while diffusing it by 100%. The result is a light-transmitting panel that is not transparent but is highly translucent.
How do I design the secondary steel support spacings for roofing/siding?
Palram created specific loading tables for each product. Please visit our website and download the specific catalog.
Can I install corrugated PVC and polycarbonate sheets horizontally for siding?
Yes. Make sure you start installing from the bottom up so the overlaps will not let the water in.
How do I clean the polycarbonate?
  • Never use abrasive or high alkaline cleaners on any Palram polycarbonate products.
  • Do not leave cleaners on Palram polycarbonate for extended periods of time. Rinse immediately with cold, clean water.
  • Do not apply cleaners in direct sunlight.
  • Never use sharp objects, squeegees or razors on polycarbonate.
  • Do not clean with gasoline.
  • Always practice safety first and never step directly on a polycarbonate panel.
  • Always test cleaners in a small inconspicuous area prior to cleaning the entire panel to ensure against adverse results.
  • Avoid allowing the pressure washer spray tip to come too close to the panel. Pressure washers often have enough pressure at the spray tip to penetrate or tear the panel.
  • Avoid dry cleaning as sand and dust particles clinging to the exterior of the panels may scratch the surface.
When should I use PVC corrugated sheets versus polycarbonate corrugated sheets?
PVC corrugated sheets are mainly used for opaque roofing and siding of industrial buildings in highly-corrosive environments such as port warehouses, cowsheds, and dairies. Polycarbonate corrugated sheets are mainly used as roofing or siding where natural daylight illumination is needed.
What are the benefits of using polycarbonate standing-seam system over standard polycarbonate sheets?
The main benefit of the standing-seam system is that unlike standard sheets, it is sold together with all installation accessories. This system also provides superior water tightness and is easier and faster to install.
What is the meaning of Shading Coefficient (SC)?
Shading coefficient (SC) is a parameter that compares transparent and translucent materials with clear 3 mm glass with 87% LT ׂ(light transmission). The lower the value, the more convenient it is to stay under the material on warm, sunny days. In architectural projects, the SC should usually be between 0.3 to 0.5.
When should I specify a matte surface finish for the polycarbonate?
A matte surface finish is good if you want to avoid glare within your surroundings.
How do I determine the color, Light Transmission (LT) and haze properties of polycarbonate?
This decision depends on the application – some of the colors are transparent and some are translucent. If a see-through material is needed, then haze should be smaller than 1% and the LT% should be based on the illumination design. If a translucent effect is needed, then the haze should be 100% and the LT% based on the chosen color.
Where should I use corrugated versus multiwall polycarbonate covering?
SUNTUF Plus corrugated polycarbonate sheets provide the best light transmittance and UV light resistance, with exceptional load bearing and impact-resistance properties. SUNLITE Plus multiwall PC sheets provide the best thermal insulation. In locations where you would prefer thermal insulation to light transmission, you should use SUNLITE Plus multiwall PC sheets.
Can I cover my old polyethylene greenhouse with polycarbonate while still keeping the old structure?
Yes, but with minor reinforcements to the structure in order to support the load.
Will polycarbonate light transmittance deteriorate over time?
PALRAM’s polycarbonate products are shielded with a UV protection layer that guards against photodegradation, yellowing, and brittleness. This protects the sheets from the harmful impact of UV radiation and helps to maintain light transmittance and quality for many years. Our products come with a 10-year warranty against loss of light transmittance. Upon special request, we can provide an enforced UV protection layer with a longer warranty.