EZ GLAZE™
DIY POLYCARBONATE ROOFING PANELS

High-Performance Polycarbonate Sheets with a Glass-Like Appearance

EZ Glaze smart layout simplifies installation and fastening, while providing high load capacity and durability. The 3 mm thick polycarbonate sheets fit directly over rafters without supporting purlins. EZ Glaze is an attractive and user-friendly solution for flat roof design, clear patio roofs, DIY polycarbonate roof panels, and DIY skylights. 

Enjoy natural daylight and comfort with outstanding design and finish. EZ Glaze offers easy, safe and fast installation, extra strength and hail-resistance, durability and UV protection. 

Product videoInstallation Guide

Benefits

Brighten Up Your Home with EZ Glaze glass-like polycarbonate. Create a stylish outdoor seating area.

Lightweight & easy
to install

Glass appearance

Rafter installation

Extra durable 

Clear & elegant

 Protects against
UV radiation

EZ Glaze Residential Pergola.

Applications

Transform your outdoor area into a sleek, modern space with EZ Glaze
  • Polycarbonate entrance canopy sheets

  • Glass-like polycarbonate pergola roofing

  • Outdoor canopy roofing

  • Glass-like sheets roof for pergola 

  • DIY skylights

  • Clear roof panels for gazebo

  • Patio rain cover

  • DIY garden shelter

  • DIY façade durable panels

  • Conservatory roofing sheets

Color Swatch

Choose from a variety of clear or colored polycarbonate sheets.
  • Clear

    90% light transmission

  • Grey

    20% light transmission

  • Bluish Breeze

    70% light transmission

  • Bronze

    20% light transmission

  • Solar Ice

    20% light transmission

  • Solar Control

    25% light transmission

  • White Opal

    20% light transmission

Videos

Roof your patio in a snap with EZ Glaze Glass-like DIY polycarbonate. Get the help you need with these EZ Glaze how-to videos.
  • The benefits of EZ Glaze

    Sun protection. Exceptionally durable. Smart design. Glass appearance. Easy DIY.

    Watch video>
  • EZ Glaze in a time-laps

    If you’re thinking about installing your own car park canopy, this video is for you!

    Watch video>
  • Installing EZ Glaze 50

    EZ Glaze 50mm span profile. Learn how to install. Your Garden Roof Just Got a Lot Easier!

    Watch video>
  • Installing EZ Glaze 60

    EZ Glaze 60mm span profile. Learn how to install. Your backyard’s most valuable addition!

    Watch video>
  • EZ Glaze roof pitch

    Using roof slope calculator to enable proper drainage: Do it professionally.

    Watch video>

Downloads

Downloads

File name
Size
EZ Glaze Leaflet (En).pdfEZ Glaze Leaflet (En).pdf
3 MB
Finishing Accessories Page (En).pdfFinishing Accessories Page (En).pdf
502 KB
EZ Glaze Installation Guide (En).pdfEZ Glaze Installation Guide (En).pdf
2 MB

FAQ

Just in case you need more options for your products, discover other products that may be a better fit for your project.
Show FAQs
How do I curve the polycarbonate to follow the façade curve?
+
All Palram polycarbonate products can be cold bent onsite during installation, subject to a minimum radius. The radius varies based on the chosen product. For flat sheets such as PALSUN & SUNLITE, the rule-of-thumb for the minimum radius is the thickness multiplied by 200. Please check the Palram catalog for more detailed specifications.
PALGARD® PALSUN® SUNGLAZE – Old SUNLITE® SUNLITE® PLUS SUNPAL® SUNTOP® SUNTUF® Private: SUNTUF DIY – OLD SUNTUF® PLUS PUBL — New Product Page Example SUNTUF DIY SUNTUF BH EZ Glaze SUNTUF ZigZag
How do I specify the required thickness of the polycarbonate glazing material?
+
The recommended thickness of the polycarbonate glazing material is based on factors such as wind & snow load, panel size, and boundary conditions. Visit the Palram website for access to calculators that can help you determine the recommended thickness.
PALGARD® PALSUN® SUNGLAZE – Old SUNLITE® SUNLITE® PLUS SUNPAL® SUNTOP® SUNTUF® Private: SUNTUF DIY – OLD SUNTUF® PLUS PUBL — New Product Page Example SUNTUF DIY EZ Glaze SUNTUF BH SUNTUF ZigZag
How do I reduce the heat build-up coming from the façade into the building?
+
In order to reduce heat build-up through the façade, Palram strongly recommends the use of its tinted SolarSmart™ panels. SolarSmart™ tints can be implemented in all Palram polycarbonate products. For more information, reference the Palram SolarSmart™ technology page.
PALGARD® PALSUN® SUNGLAZE – Old SUNLITE® SUNLITE® PLUS SUNPAL® SUNTUF® Private: SUNTUF DIY – OLD SUNTUF® PLUS PUBL — New Product Page Example SUNTUF DIY EZ Glaze SUNTUF BH SUNTUF ZigZag
What is the minimum allowed bending radius of polycarbonate?
+
The minimum allowed bending radius of the polycarbonate is 200 times the thickness of the sheet, for example, a 2 mm sheet has a minimum 400 mm bending radius.
PALGARD® PALSUN® SUNGLAZE – Old SUNLITE® SUNLITE® PLUS SUNTOP® SUNTUF® Private: SUNTUF DIY – OLD SUNTUF® PLUS SUNTUF DIY EZ Glaze SUNTUF BH SUNTUF ZigZag
Can the percentage of light transmission be controlled? I need a lot of light but I need it to be diffused.
+
Palram offers various LT% parameters – from 0% to 90%. In addition, we offer a color called a “diffuser” that allows 85% of the light in while diffusing it by 100%. The result is a light-transmitting panel that is not transparent but is highly translucent.
PALCLEAR® PALGARD® PALGLAS® PALSHIELD® PALSUN® SUNGLAS™ SUNGLAZE – Old SUNLITE® SUNLITE® PLUS SUNPAL® SUNTUF® SUNTUF® PLUS SUNTUF DIY EZ Glaze SUNTUF BH SUNTUF ZigZag
Can corrugated sheets be curved?
+
Yes. Corrugated sheets can be cold-curved to create arched shapes. It’s important to follow the relevant Palram specifications for minimum radius in cold-curving, which can be found in the Installation Instructions of the relevant sheets. In addition, corrugated sheets should be arched so that the corrugations themselves are curved lengthwise.
AG-TUF® CORRUGATED PVC PALRUF – Old SUNGLAS™ SUNTOP® SUNTUF® Private: SUNTUF DIY – OLD PUBL — New Product Page Example SUNTUF DIY EZ Glaze SUNTUF BH SUNTUF ZigZag
How do I design the secondary steel support spacings for roofing/siding?
+
Palram created specific loading tables for each product. Please visit our website and download the specific catalog.
AG-TUF® CORRUGATED PVC PALGLAS® PALRUF – Old PALSUN® PALTOP SUNGLAS™ SUNGLAZE – Old SUNLITE® SUNLITE® PLUS SUNPAL® SUNTOP® SUNTUF® SUNTUF® PLUS SUNTUF DIY EZ Glaze SUNTUF BH SUNTUF ZigZag
Can I install corrugated PVC and polycarbonate sheets horizontally for siding?
+
Yes. Make sure you start installing from the bottom up so the overlaps will not let the water in.
AG-TUF® CORRUGATED PVC PALRUF – Old SUNGLAZE – Old SUNTOP® SUNTUF® SUNTUF® PLUS SUNTUF DIY EZ Glaze SUNTUF BH SUNTUF ZigZag
How do I clean the polycarbonate?
+
  • Never use abrasive or high alkaline cleaners on any Palram polycarbonate products.
  • Do not leave cleaners on Palram polycarbonate for extended periods of time. Rinse immediately with cold, clean water.
  • Do not apply cleaners in direct sunlight.
  • Never use sharp objects, squeegees or razors on polycarbonate.
  • Do not clean with gasoline.
  • Always practice safety first and never step directly on a polycarbonate panel.
  • Always test cleaners in a small inconspicuous area prior to cleaning the entire panel to ensure against adverse results.
  • Avoid allowing the pressure washer spray tip to come too close to the panel. Pressure washers often have enough pressure at the spray tip to penetrate or tear the panel.
  • Avoid dry cleaning as sand and dust particles clinging to the exterior of the panels may scratch the surface.
PALGARD® PALSHIELD® PALSUN® SUNGLAZE – Old SUNLITE® SUNLITE® PLUS SUNPAL® SUNTOP® SUNTUF® SUNTUF® PLUS SUNTUF DIY SUNTUF BH EZ Glaze SUNTUF ZigZag
When should I use PVC corrugated sheets versus polycarbonate corrugated sheets?
+
PVC corrugated sheets are mainly used for opaque roofing and siding of industrial buildings in highly-corrosive environments such as port warehouses, cowsheds, and dairies. Polycarbonate corrugated sheets are mainly used as roofing or siding where natural daylight illumination is needed.
AG-TUF® CORRUGATED PVC PALRUF – Old SUNTOP® SUNTUF® SUNTUF® PLUS SUNTUF DIY EZ Glaze SUNTUF BH SUNTUF ZigZag
What are the benefits of using polycarbonate standing-seam system over standard polycarbonate sheets?
+
The main benefit of the standing-seam system is that unlike standard sheets, it is sold together with all installation accessories. This system also provides superior water tightness and is easier and faster to install.
SUNGLAZE – Old SUNPAL® SUNTUF DIY SUNTUF BH EZ Glaze SUNTUF ZigZag
What is the meaning of Shading Coefficient (SC)?
+
Shading coefficient (SC) is a parameter that compares transparent and translucent materials with clear 3 mm glass with 87% LT ׂ(light transmission). The lower the value, the more convenient it is to stay under the material on warm, sunny days. In architectural projects, the SC should usually be between 0.3 to 0.5.
PALCLEAR® PALGARD® PALGLAS® PALSHIELD® PALSUN® SUNGLAS™ SUNGLAZE – Old SUNLITE® SUNLITE® PLUS SUNPAL® SUNTUF® SUNTUF® PLUS SUNTUF DIY EZ Glaze SUNTUF BH SUNTUF ZigZag
When should I specify a matte surface finish for the polycarbonate?
+
A matte surface finish is good if you want to avoid glare within your surroundings.
PALGARD® PALSUN® SUNGLAZE – Old SUNLITE® SUNPAL® SUNTUF® SUNTUF DIY EZ Glaze SUNTUF BH SUNTUF ZigZag
How do I determine the color, Light Transmission (LT) and haze properties of polycarbonate?
+
This decision depends on the application – some of the colors are transparent and some are translucent. If a see-through material is needed, then haze should be smaller than 1% and the LT% should be based on the illumination design. If a translucent effect is needed, then the haze should be 100% and the LT% based on the chosen color.
PALGARD® PALSUN® SUNGLAZE – Old SUNLITE® SUNLITE® PLUS SUNPAL® SUNTUF® SUNTUF® PLUS SUNTUF DIY EZ Glaze SUNTUF BH SUNTUF ZigZag
Where should I use corrugated versus multiwall polycarbonate covering?
+
SUNTUF Plus corrugated polycarbonate sheets provide the best light transmittance and UV light resistance, with exceptional load bearing and impact-resistance properties. SUNLITE Plus multiwall PC sheets provide the best thermal insulation. In locations where you would prefer thermal insulation to light transmission, you should use SUNLITE Plus multiwall PC sheets.
SUNLITE® SUNLITE® PLUS SUNTOP® SUNTUF® SUNTUF® PLUS SUNTUF DIY EZ Glaze SUNTUF BH SUNTUF ZigZag
Can I cover my old polyethylene greenhouse with polycarbonate while still keeping the old structure?
+
Yes, but with minor reinforcements to the structure in order to support the load.
PALSUN® SUNGLAZE – Old SUNLITE® SUNLITE® PLUS SUNPAL® SUNTUF® SUNTUF® PLUS SUNTUF DIY EZ Glaze SUNTUF BH SUNTUF ZigZag
Will polycarbonate light transmittance deteriorate over time?
+
PALRAM’s polycarbonate products are shielded with a UV protection layer that guards against photodegradation, yellowing, and brittleness. This protects the sheets from the harmful impact of UV radiation and helps to maintain light transmittance and quality for many years. Our products come with a 10-year warranty against loss of light transmittance. Upon special request, we can provide an enforced UV protection layer with a longer warranty.
PALGARD® PALOPAQUE™ PALSHIELD® PALSUN® SUNGLAZE – Old SUNLITE® SUNLITE® PLUS SUNPAL® SUNTUF® SUNTUF® PLUS SUNTUF DIY EZ Glaze SUNTUF BH SUNTUF ZigZag
Can the percentage of light transmission be controlled? I need a lot of light but I need it to be diffused.
+
Palram offers various LT% parameters – from 0% to 90%. In addition, we offer a color called a “diffuser” that allows 85% of the light in while diffusing it by 100%. The result is a light-transmitting panel that is not transparent but is highly translucent.
PALCLEAR® PALGARD® PALGLAS® PALSHIELD® PALSUN® SUNGLAS™ SUNGLAZE – Old SUNLITE® SUNLITE® PLUS SUNPAL® SUNTUF® SUNTUF® PLUS SUNTUF DIY EZ Glaze SUNTUF BH SUNTUF ZigZag
How do I determine the color, Light Transmission (LT) and haze properties of polycarbonate?
+
This decision depends on the application – some of the colors are transparent and some are translucent. If a see-through material is needed, then haze should be smaller than 1% and the LT% should be based on the illumination design. If a translucent effect is needed, then the haze should be 100% and the LT% based on the chosen color.
PALGARD® PALSUN® SUNGLAZE – Old SUNLITE® SUNLITE® PLUS SUNPAL® SUNTUF® SUNTUF® PLUS SUNTUF DIY EZ Glaze SUNTUF BH SUNTUF ZigZag

Similar Products

In case you need more options, here are some similar products you might like.

Contact Us

We're here to help you with whatever you need.

You may unsubscribe from these communications at any time. For more information on how to unsubscribe, our privacy practices, and how we are committed to protecting and respecting your privacy, please review our Privacy Policy. This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Some of these cookies are essential, while others help us to improve your experience by providing insights into how the site is being used. We use cookies, including third party cookies, for analytics, to optimize and personalize the site and our services, enhance site usage, and assist in our analytics and marketing. By clicking I Accept you allow our site to place those cookies on your browser. Click Reject all to reject all non-essential cookies.

For more details on our cookie policy, see our Privacy Policy

For more details on our cookie policy, see our Privacy Policy

For more details on our cookie policy, see our Privacy Policy