Question 1

Which of Palram's products have received CCMC Approval?

Accepted Answer

Question 2

What is the recommended ceiling height when installing Palruf or Suntuf over a grill?

Accepted Answer

There no set height. All grills are different and cook at wide range of temperatures. Customers who wish to grill under Suntuf or Palruf must be certain that the maximum temperature above the grill never exceeds 212°F for Suntuf and 122°F for Palruf.

These temperatures represent the maximum service temperature for both products. If the products are subjected to temperatures higher than these, the product warranty will be voided and damage can occur to the panels.

Question 3

Why does water drip from the underside of my roofing panels?

Accepted Answer

This is almost certainly due to condensation buildup on the underside of the panels. The condensation that forms is not a direct result of the Suntuf panels, but rather the surrounding environment in which the panels are installed.

To learn what condensation is, why it occurs, and a few suggestions that can help minimize it, click here to download Palram Tech Brief #5007.

Question 4

What considerations are there for fastening Palram products to ACQ treated lumber?

Accepted Answer

The new guidelines by manufacturers of ACQ lumber call for heavily galvanized or stainless steel fasteners due to the corrosive nature of the ACQ treatment.

You have two basic options for using Palram products with ACQ lumber:

Use a comparable fastener made from an ACQ approved material. Make sure that such a fastener uses either a neoprene or EPDM washer, and that it is installed per Palram’s recommendations.
Use Palram’s fasteners. Initial tests with ACQ have shown no adverse effect on our fasteners. This is added to the fact that the fasteners are being used to secure a light weight plastic panel (rather than connect structural members). If you use Palram fasteners, our 10 year warranty will still apply.

Question 5

What is the difference between DynaGlas and Suntuf?

Accepted Answer

DynaGlas branded products are engineered specifically for commercial greenhouse applications. Panel widths, thicknesses, pigments, and special greenhouse-specific features (such as guaranteed condensate control) are consistent with commercial growers' needs.

Aside from commercial greenhouse-specific features, DynaGlas is the same as Suntuf (for equal thicknesses, weights, corrugation profiles, and panel widths). Outside of North America, Palram uses the Suntuf brand instead of DynaGlas.

Question 6

What's the difference between ThermaGlas and Sunlite?

Accepted Answer

ThermaGlas branded products are engineered specifically for commercial greenhouse applications. Panel widths, thicknesses, pigments, and special greenhouse-specific features (such as guaranteed condensate control) are consistent with commercial growers' needs.

Aside from these commercial greenhouse-specific features, ThermaGlas is the same as Sunlite (for equal thicknesses, weights, and panel widths). Outside of North America, Palram uses the Sunlite brand instead of ThermaGlas.

Question 7

Can I paint structural rafters before installing Palram roofing sheets?

Accepted Answer

Yes, you can paint structural rafters or supports – but be sure to paint only with light or white color. Do not use dark colors like black or brown that can absorb and reflect intense heat.

Question 8

Can I leave on the masking tapes that block both ends of Palram multiwall products?

Accepted Answer

No. These tapes, used on Sunlite and ThermaGlas products, are for packaging/storage only, and are not strong enough for field service.

After installing multiwall sheets, seal the top end with aluminum foil solid tape, and the bottom end with special ventilating breather tape.

Question 9

Why do some polycarbonate sheets have a "UV side" to face outwards?

Accepted Answer

Most Palram polycarbonate products feature a very thin co-extruded layer of UV-resistant resins that protect the entire sheet from UV radiation. In most cases, UV protection is applied to one side. However, two-sided UV protection is available for select products.

Polycarbonate inherently blocks UV radiation by absorbing it and not allowing it to pass through the panel. However, UV also degrades polycarbonate over time. Therefore, Palram adds additional UV protection specifically to protect the sheet, not to block additional UV from getting through the sheet.

To ensure the protection of single-sided UV protected sheets, they must be installed with the marked UV protective layer facing out toward the sun. Although sheet products can also be UV protected on both sides, most of the sheets are protected on one side that is marked clearly.

Question 10

Do Palram roofing sheets block UV radiation?

Accepted Answer

Some of them do. Rigid PVC and polycarbonate sheets are practically opaque to UV radiation, making them a perfect barrier against this harmful radiation. They actually block UV-A and UV-B radiation better than nearly any sunscreen lotion.

On the other hand, acrylic roofing sheets (which are not produced by Palram) generally transmit a considerable portion of the UV radiation.

Review the technical datasheet for each Palram product for specific UV information.

Question 11

What is the purpose of the protective polyethylene films on certain sheets?

Accepted Answer

The protective films in flat (non-corrugated) Palram sheets are for protection against dirt and scratching during the long journey from manufacturing to the job site. In some cases, the film also carries important installation and other product information.

The film will also indicate which side is UV-protected. This side should be installed facing outwards (extremely important).

In most cases, we recommend peeling off the protective films after installation. If this is not possible for practical reasons, always mark the UV protected surface, if there is one, so that the sheet will not be installed upside down.

Important note: The protective films that cover Palram sheets are highly sensitive to heat and direct sunlight. Excessive heat and direct sunlight before taking off the film can cause gluing of that film to the sheet surface, after which it will be extremely difficult to remove it from the sheet.

Question 12

Can I walk over roofing sheets while in storage or during/after installation?

Accepted Answer

Under no circumstances should you walk, stand or kneel directly on roofing sheets! The risk of breaking the sheets and falling is too great.

If you can't avoid accessing the roof area during installation, always use a crawl board that is strong enough to support the weight of the person. The crawl board must span at least three supporting roof rafters or purlins.

Question 13

When roofing with corrugated panels, should I insert screws in the "valley" or at the "crest" of the corrugation?

Accepted Answer

Crest fastening is almost always preferred, but some of our corrugated products do require fastening in the corrugation valley. See the individual installation guide for each product to see specific instructions.

Question 14

When roofing with corrugated panels, where should I start?

Accepted Answer

It depends mostly on access to your roof. You can choose to install left to right, or right to left, or start at the middle and continue to both sides.

However, never start at both sides toward the middle, or at any two separate points.

Most importantly – always overlap the panels in such a way so that the wind cannot get under the ends of the panel. This can cause "uplift" and, depending on wind speed, can actually pull the panels off the roof.

Question 15

What should I use to clean Suntuf or Sunlite panels?

Accepted Answer

Warm water with a mild household detergent should be sufficient to clean Suntuf or Sunlite panels. Gently wipe off any remaining dirt with a soft cloth and wash again.

Never use a solvent-based cleaner (ammonia, etc.), and avoid abrasive sponges or brushes that can scratch the panels surface.

Question 16

Can I paint polycarbonate panels?

Accepted Answer

We do not recommend painting our polycarbonate panels. Polycarbonate is a very resilient material, but it is potentially sensitive to chemicals contained in many exterior paints. While we can test a paint for compatibility, we have no way of controlling whether a paint manufacturer will remain consistent with their formulas over time.

Question 17

Do Suntuf flashing accessories come in the same colors as the panels?

Accepted Answer

Yes. Suntuf flashing accessories are available in Clear, White and Solar Gray, although they may need to be specially ordered, depending on your retailer.

Question 18

Do Palram panels keep out heat?

Accepted Answer

Palram products are available in a variety of colors, which varies by product. Each has its own heat and light transmission properties. While all Palram panels block virtually 100% of harmful UV radiation, there are variations in heat and light transmission.

Clear panels allow the most solar light and heat through, while lighter, opaque colors are more reflective. If excessive heat buildup is a concern, our "Solar Control" panels are your best bet. Please see each product page for more information on color offerings, light transmission percentages and warranty terms.

Question 19

What are "closure strips"?

Accepted Answer

Closure strips match the corrugation pattern of the panels of Suntuf, Palruf, Sun 'N Rain and Suntop panels. The closure strips are attached to the purlins, which are horizontal supporting members that support a roof. Sometimes purlins are used with rafters, which run perpendicular to the purlins.

See the document section at the bottom of each product's web page for complete installation information.

Question 20

I'd like to build my own greenhouse. What are my options?

Accepted Answer

For hobbyists and homeowners, our sister company, Palram Applications, offers easy-to-assemble greenhouse kits. These products are available through many online stores and select garden centers throughout North America.

If you plan to design and build your own home structure, consider our Suntuf corrugated polycarbonate panels or Sunlite multiwall panels. Suntuf is widely available at Home Depot's throughout North America, as well as many independent retailers. Sunlite is available at select Home Depot's and some independent retailers.

For commercial applications, our DynaGlas and ThermaGlas panels are a great choice. DynaGlas and ThermaGlas are available from commercial greenhouse manufacturers and greenhouse supply distributors. Contact our Master Distributor, Green-Tek, for a dealer near you.

You can also contact us with your specific needs and we'll help you make the best decision for your application.

Question 21

How do I cut Palram's rigid PVC or polycarbonate panels?

Accepted Answer

Corrugated and multiwall panels may be cut with a circular saw (using a very fine-toothed blade made for plastic panels, veneer or plywood). For best results, it is often better to cut just a few corrugated panels at a time to reduce vibration. Clamping the panels also helps. (But be careful clamping multiwall to avoid compression.)

If using a standard circular saw blade, better results may be seen by running the blade backwards (remove and turn it over to reverse direction). Depending on thickness, some panels may also be cut by hand by carefully using tin snips or a utility knife.

For other cutting instructions and further details, please visit each product's document page. You can also view our general Corrugated Products Installation Overview video.

Question 22

What is the best way to fasten Palram rigid PVC and polycarbonate panels in place?

Accepted Answer

The best way is to use Palram-recommended screws fastened through pre-drilled holes that are slightly larger than the diameter of the screw. Pre-drilling insures that the panels will have room to expand and contract properly with temperature change. Skipping this step can lead to distorted or warped panels.

Whatever you do, never use nails. Unlike wood fibers, which compress when a nail is hammered in, Palram's rigid PVC and polycarbonate panels do not compress. That means there is significant risk of cracking and impact damage in the area of the attachment. Also, nailing the panels in place prevents them from safely expanding and contracting with temperature change, resulting in warping of the product.

For exact hole size guidelines and other important installation instructions, see the documents at the bottom of each specific product's web page.

Question 23

What adhesive should I use to bond two sheets of Palruf PVC corrugated roofing where they overlap?

Accepted Answer

First, do not use adhesives or caulks that contain silicone when working with PVC.

If waterproofing is your primary concern, use a PVC-specific caulk/sealant. Unlike adhesives, PVC caulks are meant to fill gaps and create a water-resistant seal between materials.

If bonding is more important, don't use PVC pipe glue, which is often colored blue. Instead, choose a PVC-to-PVC adhesive such as Weld-On 705, OSI Quad, Christy’s Red Hot or PVC TrimWelder.

Question 24

What adhesive should I use for polycarbonate panels like Suntuf or Suntop?

Accepted Answer

First off, don't use PVC cement. PVC cement and polycarbonate do not react well. Also, generally speaking, Suntof/Suntop panels are not recommended to be "glued" together. For sealing polycarbonate, use a 100% silicone caulking.

Question 25

How important is it to follow Palram general recommendations on product usage?

Accepted Answer

Very. Palram recommendations for the storage, installation and general treatment of products are drafted to ensure that the product’s quality and serviceability is met to full extent, and following these recommendations ensures that product warranty isn't void. Please be sure to view the specific product's documents for more information.

Question 26

Do I really need to buy Palram's recommended fasteners and related accessories?

Accepted Answer

To ensure long-term warranty coverage, it is strongly recommended to use Palram-approved fasteners and accessories, which have been tested to ensure high quality and function.

Palram products + fasteners + related accessories should be thought of as a system meant to provide the best possible installation. Proper use of the complete system greatly reduces the possibility of problems and insures that product warranty will be honored.

Please see the installation instructions for the specific product for details.

Question 27

Do Palram sheets expand in heat?

Accepted Answer

Yes. PVC and polycarbonate sheets expand with heat, and contract with cold.

Various Palram sheet products require different installation and fastening methods to account for expansion/contraction.

Always review the specific installation instructions for each Palram product before installing.

Question 28

Do any Palram polycarbonate products have a UL 94 fire rating?

Accepted Answer

Yes, some Palram products do have a UL 94 fire rating.

PALSUN FAMILY
PALCLEAR
PALCLAD PRO HYG

Click here to view the UL 94 Tech Brief for the most up-to-date information.

You may also click here to view the Palram UL listing on the official UL website.

Question 29

Can Palram sheets catch fire?

Accepted Answer

All plastic materials are flammable to some degree, and will catch fire in presence of exterior flame.

The ignition temperature of polycarbonate sheets is 915ºF (490ºC).

The ignition temperature of PVC sheets is 736ºF (391ºC).

Both materials are self-extinguishing, and fire will decay when the exterior flame source is removed.

Note that compared to polycarbonate and PVC, acrylic sheets (which are not produced by Palram) are more flammable.

Question 30

Can Palram sheets be curved?

Accepted Answer

Bending/forming instructions vary by sheet material. Always check the installation instructions of the relevant sheet material.

But in general, some of our sheets can be cold-curved for arched shapes, provided the relevant Palram specifications for minimum radius in cold-curving are followed.

Rigid flat sheets can be cold-curved in any direction.

Corrugated sheets can be cold arched "along the grain" of the corrugation (lengthwise). Corrugated sheets cannot be curved/arched "against the grain." That is, do not bend perpendicular to the direction of the ribs.

Like corrugated sheets, multiwall sheets can be arched only "along the grain" of multiwall (lengthwise).

Our Palight Trimboard "lumber-style" boards can be heat formed in any direction, with the proper heating equipment and forming jig.

Again, see the installation guidelines for each material for specific instructions.

Question 31

How should I store Palram sheets when not in use?

Accepted Answer

Store sheets in a protected, shaded, ventilated site, with no direct exposure to sunlight and winds. For outdoor temporary storage, cover with an opaque protective tarp, avoiding heat-absorbing materials.

Important note: Palram flat (non-corrugated) panels have a protective surface film that keeps the product safe from dirt and scratches during the long journey from manufacturing to the job site.

These films are sensitive to heat and direct sunlight. Excessive heat and direct sunlight before taking off the film can cause that film to bond the sheet surface, after which it will be extremely difficult to remove the film from the sheet.

Question 32

Can I use any of Palram's products as a hurricane screen?

Accepted Answer

Palram has one product specifically designed for hurricane protection: Stormlite Multi-Wall Polycarbonate. Review the product page for more information.

Palram's other polycarbonate panels have excellent impact resistance, but the thin gauge of these products makes them inappropriate for this application.

Question 33

How long do Palram PVC and polycarbonate products last?

Accepted Answer

Palram manufactures a variety of different products for different applications. Most have industry-leading warranties against manufacturing related defects, as well as specific warranties related to the intended use for the product.

However, with proper installation and maintenance, our products typically far exceed their warranty periods.

Many of our products are engineered to be installed outdoors and are warranted accordingly. Nevertheless, the lifespan of outdoor products can be affected by how well they were installed, as well as environmental factors like air pollution, sun exposure, winds and erosion by airborne particles.

Warranty details can be found in the Downloads tab under the Warranties section at the bottom of the page for each individual product.

Question 34

Can I recycle Palram polycarbonate or PVC panel scraps?

Accepted Answer

Yes, Palram's polycarbonate and PVC sheet products are recyclable.

Polycarbonate products such as Suntuf, Sunlite, Palsun, DynaGlas, or ThermaGlas should be marked "Plastic #7" prior to recycling.

PVC products such as Palruf, Ag-Tuf, PALCLAD PRO HYG, Palclear, or should be marked "Plastic #3".

If local recycling is not available, other resources are available. For PVC products, click here to visit the Vinyl Institute's Recycling Provider Database.

For polycarbonate products, visit The Association of Post Consumer Plastic Recyclers site and review their materials buyers and seller's list.

Professional

DIY/Residential

Professional

DIY/Residential

Professional

DIY/Residential

Professional

DIY/Residential

Professional

FREQUENTLY ASKED QUESTIONS

Subject + -

Category + -

Product + -

Contact Us

Subject + -

Category + -

Product + -

Contact Us

This site uses cookies