SUNGLAZE solid polycarbonate roofing system

SUNGLAZE™ SOLID POLYCARBONATE ARCHITECTURAL SYSTEM

Standing-seam panel and glazing system that adapts to any project - big or small

SUNGLAZE is a solid polycarbonate roofing system that offers smart design, elegant appearance, versatility, low maintenance and sustainable performance for a variety of architectural challenges. The system has been installed on many types of structures throughout the world, including commercial, public sector and multi-family buildings.

The SUNGLAZE system uses a gasket-free, standing seam technology with no through fastening to ensure a water-tight installation. It's engineered to allow for wide spans with increased loading capacity and can be utilized in both flat and curved designs.

SUNGLAZE is an architecturally specified system that is not stocked in retail locations. If you are an architect, engineer, designer or commercial builder please contact Palram for information, design assistance, and path to purchase.

If you're a homeowner or have interest in residential projects, check out the DIY version for home improvement - the SUNSCAPE® Premium Roof Covering System.

Construction & Architecture

Earn an HSW & GBCI Credit Fast

Check out this CEU course hosted on Hanley Wood which focuses on specific material choices and inspiring case studies that demonstrate the success possible when using polycarbonate architectural solutions.

Main Benefits

Clear and elegant appearance
Standing-seam leak-proof performance
Allows for thermal expansion & contraction
Free of silicone sealants and caulking
Engineered to withstand high loads
Easy, fast and safe installation
Minimal maintenance
Glass-like appearance

Typical Applications

Roofing & glazing systems for commercial architecture and multi-family residences
Sports venues roofing
Covered walkways
Open markets
Service stations
Entrances
Pool covers
Awnings

Principles of SUNGLAZE & SUNPAL Polycarbonate Systems

This video is a 3D-animated rendering that shows the principles of installing the SUNPAL and SUNGLAZE polycarbonate architectural systems.

Projects

Hampton Inn Hotel, Florida

SUNGLAZE was used for this attractive curved canopy over the main entrance of the hotel.

Riverview Condo Development in Florida

Riverview HOA chose Palram’s polycarbonate standing-seam panel and glazing system to replace 1,400 square feet of failing glass walkway coverings.

Hangzhou Airport, China

SUNGLAZE was selected for this curved canopy due to its ability to be formed to meet the structural design.

Barker Hotel, Australia

A SUNGLAZE system was installed for its versatility, low maintenance, sustainable performance & appearance.

Anvers Confectionery, Australia

The SUNGLAZE system provided a safe solution with leak & shatterproof roofing.

Manufactura Outlet Mall, Ukraine

A glass-like SUNGLAZE system integrates with the architectural style. The roof is leak-proof & blocks harmful UV radiation.

SUNGLAZE™ Testimonial

LET VISITORS ENJOY THE SUNSHINE WHILE KEEPING THEM COOL & COMFORTABLE

Architects and developers around the world are working to create environments that are bright, enjoyable and comfortable—a combination that can be difficult to achieve while also maintaining energy efficiency and sustainability.

Palram offers four different types of polycarbonate glazing products including flat solid sheets, multiwall sheets, single-layer corrugated sheets, and complete panel systems. Our Project Support Engineers can help you evaluate a variety of glazing options with the goal of meeting your design aspirations, your efficiency and sustainability goals, and your budgetary and performance needs.

If you are an architect, engineer or builder and need assistance evaluating your design and developing an installation method and process, learn more about our Architectural Project Support Center.

LET VISITORS ENJOY THE SUNSHINE WHILE KEEPING THEM COOL & COMFORTABLE

Product Details

Dimensions

Panel Types

Property	SUNGLAZE 3/600	SUNGLAZE 4/600	SUNGLAZE 4/800	SUNGLAZE 6/800
Center to center width	23.62" (600mm)	23.62" (600mm)	800mm (31.5")	31.5" (800mm)
Panel width	22.99" (584mm)	23.03" (585mm)	785mm (30.905")	30.905" (785mm)
Height	0.787" (20mm)	0.827" (21mm)	21mm (0.827")	0.827" (21mm)
Area weight	0.776 lb/ft² (3.79 kg/m²)	1.034 lb/ft² (5.05 kg/m²)	4.98 kg/m² (1.02lb/ft²)	1.526 lb/ft (7.453 kg/m²)
Linear meter weight	1.476 lb/ft (2.20 kg/m)	1.972 lb/ft (2.94 kg/m)	3.90 kg/m (2.616 lb/ft)	3.997 lb/ft (5.96 kg/m)
Minimum cold bending radius* (for the polycarbonate panel)	160" (4m)	160" (4m)	160" (4m)	160" (4m)
System Weight	4.118 lb/ft (6.14 kg/m)	4.963 lb/ft (7.40 kg/m)	4.514 lb/ft (6.73 kg/m)	6.204 lb/ft (9.25 kg/m)

*Sunglaze Aluminum profiles must be roll formed separately to the desired radius, not below a minimum radius of 4m.

Colors & Finishes

Colors*

	Color	Light Transmission % ASTM D-1003	Haze % ASTM D-1003	Solar Heat Gain (SHGC) ASTM E-424-71	Shading Coefficient ASTM E-424-71
	Clear	90	<1	0.87	1.00
	Bronze	20	<1	0.45	0.52
	Bronze	35	<1	0.56	0.65
	Bronze	50	<1	0.65	0.75
	Grey	20	<1	0.44	0.51
	Grey	35	<1	0.56	0.64
	Grey	50	<1	0.65	0.75
	White Opal	28	100	0.32	0.37
	White Diffuser	80	100	0.87	1.00
	Solar Ice	20	100	0.39	0.45
Solar Smart
	Solar Control	20	67	0.33	0.36
	Solar Olympic	20	50	0.41	0.47
	Solar Olympic	35	35	0.52	0.60
	Solar Olympic	50	20	0.63	0.73
	Smart Green	70	26	0.58	0.67
	Smart Blue	50	26	0.57	0.65
	Bluish Breeze	70	1	0.55	0.63

* Other colors are available upon request, subject to a minimum quantity.

Physical Properties

Property	Conditions	Method	Units	Value
Physical
Density		D-792	g/cm³	1.2
Mechanical
Tensile Modulus of Elasticity	1 mm/min (0.4 in. /min)	D-638	MPa (psi)	2,300 (333,550)
Flexural Modulus	1.3 mm/min (0.05 in./min)	D-790	MPa (psi)	2,600 (377,100)
Flexural Strength	1 mm/min (0.04 in./min)	D-790	MPa (psi)	93 (13,500)
Notch Impact Strength Izod	23°C (73°F)	D-256	J/m	800
Impact Falling Dart	3 mm (0.125 in.) Sheet	ISO-6603/1b	J	158
Impact - Fall Through		E-695	m/kg (ft/lbs)	336 (500)
Charpy Impact after Xenon Arc Exposure (D-6110)	3000 hrs	D-2565-08	% Loss of Impact Strength	<10
Thermal
Long Term Service Temperature			°C (°F)	-50 to 100 (-58 to 248)
Short Term Service Temperature			°C (°F)	-50 to 120 (-58 to 248)
Heat Deflection Temperature	Load: 1.82 Mpa	D-648	°C (°F)	135
Vicat Softening Temperature	Load: 1 kg	D-1525	°C (°F)	150
Coefficient of Linear Thermal Expansion		D-696	cm/cm °C (inch/inch°F)	6.5 x 10-⁵ (3.6 x 10-⁵)
Thermal Conductivity		C-177	W/m°K (Btu-in./hr-ft²-°F)	0.21 (1.46)
Specific Heat Capacity		C-351	kJ/kg°K (Btu/lb°F)	1.3 (0.31)
Weathering
Color Change	60 Months	D-2244	∆E	<3
Light Transmission	10 Years	D-1003	%	<6
Yellowness Index	60 Months	E-313	∆ Yellowness Index	<10
Leakage / Structural
Water Leakage	20 psf	E-283		None
Uniform Load		E-330	psf	+140 / -45
Air Leakage	6.24 pfs (Condision of air leakage test)	E-331	cfm/ft²	0.05

Technical Data

Thermal Insulation

Thickness	SUNGLAZE™ U Value Btu / (hr•ft2•°F)	Glass U Value Btu / (hr•ft2•°F)
0.125" (3mm)	0.96	1.02
0.156" (4mm)	0.93	1.01
0.236" (6mm)	0.89	0.97

Flammability

Test	ASTM Standard	Classification
Self ignition	D-1929	1162°F
Smoke density	D-2843	<75%
Burn extent	D-635	CC1
Flame spread / smoke	E-84	Class B

Acoustic Properties

Thickness	Acoustic Insulation DIN 52210-75 RW (dB)
0.125" (3mm)	23
0.156" (4mm)	24
0.236" (6mm)	26

Frequently Asked Questions

What is the purpose of the protective polyethylene films on certain sheets?

+ -

The protective films in flat (non-corrugated) Palram sheets are for protection against dirt and scratching during the long journey from manufacturing to the job site. In some cases, the film also carries important installation and other product information.

The film will also indicate which side is UV-protected. This side should be installed facing outwards (extremely important).

In most cases, we recommend peeling off the protective films after installation. If this is not possible for practical reasons, always mark the UV protected surface, if there is one, so that the sheet will not be installed upside down.

Important note: The protective films that cover Palram sheets are highly sensitive to heat and direct sunlight. Excessive heat and direct sunlight before taking off the film can cause gluing of that film to the sheet surface, after which it will be extremely difficult to remove it from the sheet.

Professional

DIY/Residential

Professional

DIY/Residential

Professional

DIY/Residential

Professional

DIY/Residential

Professional

SUNGLAZE™ SOLID POLYCARBONATE ARCHITECTURAL SYSTEM

Standing-seam panel and glazing system that adapts to any project - big or small